Laminar Air Flow Hood Bed
1. High-efficiency with EMB origin of the German, low noise fan, air volume, low power consumption, low noise, less heat, the useful life more than 100, 000 hours.
2. Suction units is provided at the end of the bed tailgate, while soft curtain semi-enclosed design, can fully meet the isolation level constant pressure within the region, but also completely resist the tail into the air.
3. The head of air out of the wind board for the overall design. Bed frame can be removed individually placed. Bed fitted with special fixtures.
4. With PVC transparent soft curtain shower curtain, non-toxic, high transparency, are very easy to install and use, durable. Completely remove the old product chute design rusty and other defects. Also low replacement cost.
5. The entire bed frame completely within the fox design can completely avoid laminar flow region appears dead space.
6. At the top of the bed is light and good PVC board, while a special lighting system (can be replaced with UV disinfection system).
7. Primary filter device uses thrusting design, as long as the force pulling the handle can be pulled out, cleaning, and replacement is very convenient.
Specification:
1. Cleanliness level: relative level 100 IS05
Composition: composed of air purification, lighting, sterilization system, operation control, etc.When working, the top fan inhales the ambient air, which is filtered by the air purification system to become sterile and clean air.
2. Wind speed rating: adjustable in third gear
3. Wind speed: 0.1-0.3 m/s
4. Wind capacity: 600-1200 m3 / h
5. Noise: ≤46dB
6. Bacterial colony number: ≤1 (diameter: 90mm, 0.5h)
7. Temperature range :-50 ~ 150ºC ±1ºC -58 ~ 300ºF ±2ºF
8. Humidity range :0-100%RH
9. Electrical specification :AC 220V ≤300w
10. Structure: the cabinet is made of seamless welding of cold rolled steel plate, sprayed with static electricity, surrounded by edible grade transparent soft curtain, and the air supply mode is vertical.
Guangzhou Shileva Medical Equipment Co.,Ltd